Toshiba TOSVERT VF-AS3, Instruction Manual

Page: 154 / 622

E6582062 
4. [Basic operation] Operation methods of motor
4-30
4
9
11 Select "10: Touch wheel 1 (power off or press OK
to save)" and press the [OK] key.
The basic parameter screen is displayed.
Check that the setting value of <FMOd: Frequency
command select 1> is "10".
12 Press the [ESC] key or [F1] to [F4] keys to switch
to the [Standard mode] screen.
13 In [Standard mode], press the [OK] key.
The setting screen of <FC: Panel run frequency> is
displayed.
If you leave this setting screen as it is, the screen
returns to the [Standard mode] screen for a few
seconds later.
14 Change the frequency command value with the
touch wheel.
When the setting value is changed, the value on
the lower side of the screen is highlighted.
In the example on the right, it is set to 30.0 Hz. This
becomes the frequency command value.
15 Press the [OK] key.
The screen returns to the [Standard mode] screen.
0.0Hz STOP
15:17
Basic parameters
CMOd
: Run command select
vb
: Manual torque boost 1
vL
: Base frequency 1
0
4.80%
60.0Hz
Pt
: V/f Pattern
0
FMOd
: Frequency command select 1
10
F R
0.0Hz STOP
15:53
Min: 0.0 Max: 60.0
X1000 X100 X1 X10
Output frequency
0.0Hz
20.0Hz
FC :Panel run frequency
F R
0.0Hz STOP
15:28
Min: 0.0 Max: 60.0
X1000 X100 X1 X10
Output frequency
0.0Hz
30.0 Hz
FC :Panel run frequency
F R
Standard Mode
Easy Screen Copy Monitor
Hz
0.0Hz STOP
0.0
14:47
F R