Thermo Scientific Phadia 100, User Manual

Page: 350 / 357

Phadia 100 - User Manual Index
12-3501-20/12 Page 15.3
15
CAP TRANSFER MOTOR
CAN'T FIND FLAG 12.23
CAN'T POS FLAG 12.25
NOT CALIBRATED 12.20
NOT INITIALIZED 12.20
OUT OF RANGE 12.23
Capacity 1.8
Carousel
ImmunoCAP 1.6
Sample 1.4
CC-1 HIGH and CC-2 HIGH* 12.42
CC-1 HIGH and CC-2 HIGH 12.42
CC-1 HIGH and CC-2 LOW* 12.43
CC-1 HIGH and CC-2 LOW 12.42
CC-1 HIGH and CC-2 OK 12.42
CC-1 HIGH* and CC-2 HIGH* 12.44
CC-1 HIGH* and CC-2 HIGH
12.45
CC-1 HIGH* and CC-2 LOW* 12.44
CC-1 HIGH* and CC-2 LOW
12.45
CC-1 LOW and CC-2 HIGH* 12.44
CC-1 LOW and CC-2 HIGH 12.43
CC-1 LOW and CC-2 LOW* 12.44
CC-1 LOW and CC-2 LOW 12.43
CC-1 LOW and CC-2 OK 12.43
CC-1 LOW* and CC-2 HIGH* 12.45
CC-1 LOW* and CC-2 HIGH
12.46
CC-1 LOW* and CC-2 LOW* 12.45
CC-1 LOW* and CC-2 LOW 12.46
CC-1 OK and CC-2 HIGH 12.46
CC-1 OK and CC-2 LOW 12.47
Change
Dilution 4.3
Quality Control with New Lot 4.35
Replicate 4.4
Sample ID 4.5
Test 4.11
4.20
CHECK
CAPS ON VIALS 12.9
EliA WELL DISPENSE 12.8
ImmunoCAP DISPENSE 12.8
Cleaning Report 13.2
CODE FF EXECUTED 12.18
Communication Error 12.61
Communication Parameters 1.25
Conjugate Handling 3.2
CONJUGATE VIAL EMPTY 12.31
Consumption List 10.4
Contrast 1.23
Control Charts 8.7
Control Samples 8.4
CONTROLLER BOARD
TEMPERATURE TOO HIGH
12.8
CONTROLLER HALTED 12.19
Cooling Fan 1.3
Cover
Sample Carousel 1.2
Curve Control Error 12.41
Curve Control-Log
Edit 6.6
Export 6.13
Print 6.4
Printout 10.15
Curve Controls 2.31
Disable 5.8
Handling 3.2
Switch 5.7
CV % values
Calculation 2.26
CV IS TOO HIGH FOR
CALIBRATOR REPLICATES
12.39
D
Daily Maintenance 11.3
DAILY MAINTENANCE NOT
PERFORMED
12.10
Daily Rinse 11.3
DARK BLANK IS TOO HIGH 12.13
12.50
Disable 5.9
Data
Evaluation 5.2
Export 5.13
Import 5.15
Date 1.21
Dead Volume 3.8