Thermo Scientific Phadia 100, User Manual

Page: 103 / 357

Assay Run Editing Functions Phadia 100 - User Manual
P a g e 4 . 1 2 12-3501-20/12
1.4.1.2.Change Test [1239]
Enter new Test name: (sIgE) t3_
9.
Delete the old test name
and type the new test name (up
to five characters) over the old
and press
enter
.
If you want to change the
method, press
alt
before you
enter the new test.
You will be requested to type
number of replicate and dilu-
tion.
Messages that can occur
ENTERED TEST DOES NOT EXIST
The entered test name is not defined in the selected method.
TEST ALREADY ENTERED
The entered test name has already been entered for this sample identity.
YOU CANNOT CHANGE TO PANEL
It is not possible to change to a panel here. Use Enter Request to add panels.
TOO MANY METHODS AT THE SAME TIME
By changing this test, the maximal number of four methods was exceeded.
METHOD NOT COMPATIBLE
Changing to this method is not possible since there already is a method that is
not compatible with the selected one.
INSTRUMENT DILUTION TOO HIGH
The instrument dilution exceeds 100.
WRONG BAR-CODE IDENTITY
Bar-code reader could not recognize test type. Check that you have not read
the EAN code instead of the article bar-code.
10.
Select the method by
pressing the key below the
method.
If a method with more
than one test is selected you
will return to point 8.
If a method with only one test is
selected the test is added to the
run and you will come to the
Enter Replicate Number dis-
play (point 11).
Q W E R T Y U I O P
SELECT METHOD
sIgE tIgE ECP Tryp sIgG sIgA El-G El-A