Thermo Scientific Phadia 100, User Manual

Page: 257 / 357

Maintenance Phadia 100 - User Manual
P a g e 1 1 . 6 12-3501-20/12
Weekly Maintenance
6.9.Maintenance
7.Weekly Maintenance?
6.9.7.Weekly Maintenance
PRESS ENTER TO START PROCESS
6.9.Maintenance
1.Daily Maintenance?
EMPTY AND CLEAN WASH AND RINSE BOTTLES
PRESS ENTER TO CONFIRM THE ACTION
The weekly maintenance is done in order to clean the Washing Solution, Rinse
Solution and Waste Bottles and the beaker used in daily maintenance to prevent
blockage, growth and carry over.
In general, it is the same procedure as the daily maintenance, but with one
important additional item: Disconnect the Washing Solution, Rinse Solution and
Waste Bottle by using the quick release. Empty and rinse the bottles and the
beaker three times with purified water.
NOTE!
Do not unscrew the cap from the bottles if the tubings are still connected.
This can cause problems with insufficient distribution of Washing and Rinse
Solutions due to twisted tubings inside the instrument.
Fill the Washing Solution and Rinse Solution Bottles with approximately 300 ml
purified water and connect them to Phadia 100. Also connect the Waste Bottle
to the instrument.
1.
In Maintenance mode
press the number
7
key.
2.
Press the
yes
key.
3.
Press the
enter
key to
confirm this step. The rinsing
procedure takes approxi-
mately six minutes.
4.
When the weekly mainte-
nance procedure is finished,
empty and clean the Washing
Solution and Rinse Solution
Bottles. Press the
enter
key to
confirm this step.
WARNING! Washing Solution may cause
sensitization by skin contact. Wear protective
gloves!