Thermo Scientific Phadia 100, User Manual

Page: 340 / 357

Phadia 100 - User Manual Error Handling
12-3501-20/12 Page 12.63
12
For more information see Communication Parameters, chapter 1, Instrument
Specification and Installation, and Phadia IDM User Manual.
Check that the communication cables are properly connected and not damaged.
Connect or replace the cables if necessary.
If the error remains, please contact your local Phadia representative.
No Print Out
If you do not receive a printout, check that the instrument has not run out of
paper. Load a new paper roll if necessary, see chapter 11, Maintenance. If there
is paper in the printer switch Phadia 100 off, wait 10 seconds and switch it on
again.
If the error remains contact your local Phadia representative.
Bad Print Out
If there is no text on the printout or the text is difficult to read, check the printer
contrast setting, see chapter 2, Routine Assay Run. Be sure that the right side of
the paper is facing up, see chapter 11, Maintenance.
If the error remains contact your local Phadia representative.
Leakage
If process chamber is overflowing, check the drainage filter. Clean or replace the
drainage filter according to chapter 11, Maintenance.
If the error remains contact your local Phadia representative.