Thermo Scientific Phadia 100, User Manual

Page: 156 / 357

Phadia 100 - User Manual Assay Run Quality Control
12-3501-20/12 Page 6.5
6
Edit Log
4.Quality Control
1.Print Log?
4.Quality Control
2.Edit Log?
4.2.Edit Log
Method: ImmunoCAP specific IgE 0-100?
You can inactivate and activate points in the quality control and curve control
logs.
1.
In Prepare Run mode
press
4
.
2.
Press
yes
.
3.
In Print Log press
2
.
4.
Press
yes
.
5.
Press
no
until the method
you want appears, then press
yes
.
Warnings that may prevent entering
CANNOT SELECT THIS METHOD
The selected method cannot be used for this operation.
Edit Quality Control-Log
You can set the status to active or inactive for a specific QC control point. If you
change a point to the status inactive, this point will be marked inactive when the
log is printed and it will not be used in the calculation of mean and variation.
1.
In Edit Log mode press
no
until the method you want
appears, then press
yes
.
2.
Press
yes
.
4.2.Edit Log
Method: ImmunoCAP specific IgE 0-100?
4.2.Edit Log [sIgE]
1.Quality control-log?
Phadia 100 Ver.3.0 14:10:17
1.Prepare Run?
Phadia 100 Ver.3.0 14:10:17
4.Quality Control?