Thermo Scientific Phadia 100, User Manual

Page: 259 / 357

Maintenance Phadia 100 - User Manual
P a g e 1 1 . 8 12-3501-20/12
MONTHLY MAINTENANCE WASH
EMPTY AND CLEAN WASH/RINSE
MONTHLY MAINTENANCE WASH
LOAD RINSE/WASH WITH PURIFIED WATER
MONTHLY MAINTENANCE WASH
REMOVE ImmunoCAP HOLDER/ELUT.WELL DISK
MONTHLY MAINTENANCE WASH
PRESS ENTER TO START PROCESS
6.9.2.Monthly Maintenance
LOAD WASTE WITH ANTIFOAM
6.9.2.Monthly Maintenance
LOAD RINSE/WASH/WASTE WITH MAINT SOL
6.9.2.Monthly Maintenance
PRESS ENTER TO START PROCESS
5.
Add 1 ml of antifoam in
the Waste Bottle. Press the
enter
key to confirm this step.
6.
Fill the empty Rinse Solu-
tion, Washing Solution and
Waste Bottles, each with 200
ml Maintenance Solution.
Shake the bottles gently and
connect them to the instrument.
Also fill the beaker used in daily
maintenance with Maintenance
Solution. Confirm this step by
pressing the
enter
key.
7.
Press the
enter
key to start
the process. The procedure
takes approximately 30 min-
utes.
8.
When the process is fin-
ished rinse the Washing Solu-
tion and Rinse Solution Bottles
and their bottle caps and the
beaker carefully five times with
tap water and finally one time
with purified water. Press the
enter
key to confirm this step.
9.
Press the
enter
key. Fill
the Rinse Solution and Wash-
ing Solution Bottles with
350 ml of purified water each.
10.
Press the
enter
key. The
Monthly Maintenance Wash
takes approximately 30 min-
utes.
11.
When the Monthly Main-
tenance Wash is finished press
lid open
and open the Process-
ing Lid.
Take out the ImmunoCAP Holder Disc and discard the four CheckCAP. Take
out the Elution Wells Disc and the Drainage Filter and place them in Mainte-
nance Solution. Leave them in the Maintenance Solution for 30 minutes. Press
enter
to confirm this step.
NOTE! The ImmunoCAP Holder Disc is fragile and should be handled as glass.