Thermo Scientific Phadia 100, User Manual

Page: 29 / 357

Instrument Specification and Installation Phadia 100 - User Manual
P a g e 1 . 2 6 12-3501-20/12
6.7.Communication parameters COM2
1.Baud rate?
6.7.1.Baud rate COM2
Baud rate: 9600?
6.7.Communication parameters COM2
1.Baud rate?
6.7.Communication parameters COM2
2.Data bits?
6.7.Communication parameters
Select Port: COM2?
4.
Type in the new password,
then press
enter
.
5.
Retype the new password,
then press
enter
.
6.
The new password is set.
Communication Parameters
To enter this menu you need access to the laboratory password. In most cases
you do not need to change the settings for the communication parameters, if you
connect a bar code reader you sometimes need to change the settings. Follow the
steps below when you set the parameters for the bar code reader. To connect a
barcode reader of USB type, please contact your local Phadia representative.
1.
In Install/Service mode
press
7
.
2.
Press
yes
.
3.
Press
no
until the com-
munication port that you want
to change parameters for is dis-
played.
Instruments equipped with USB ports:
Choose COM2 to connect a bar code reader to the RS-232 port.
Instruments equipped with a diskette drive:
Choose COM3 to connect a bar code reader to the RS-232 port.
Confirm with
yes
.
4.
Press
yes
.
5.
Press
no
until the baud
rate you want appears, then
press
yes
.
6.
Press
no
.
7.
Press
yes
.
6.1.3.Change Password
New password:_
6.1.3.Change Password
Confirm password:_
6.1.3.Change Password
NEW PASSWORD SET
6.Install/Service
7.Communication parameters?
6.Install/Service
1.Login/Logout?