Thermo Scientific Phadia 100, User Manual

Page: 122 / 357

Phadia 100 - User Manual Assay Run Editing Functions
12-3501-20/12 Page 4.31
3
4
5
6
4
2.
Press
yes
.
3.
Delete or type over the
old maximum allowed stan-
dard deviation. Type the new
maximum allowed standard de-
viation (3 is recommended by
Phadia AB) or type 0 (zero) to
deactivate the function. Press
enter
to confirm this step.
NOTE!
If you are using range minimum and maximum from the Directions for
Use, or for EliA from the package certificate, deactivate this function.
Range minimum
The following step describes how you can change the lowest allowed concen-
tration. It is also possible to deactivate this function.
1.
In Edit QC mode press
9
.
2.
Press
yes
.
3.
Delete or type over the
old lowest allowed concentra-
tion. Type the new lowest al-
lowed concentration or type 0
(zero) to deactivate the func-
tion. Press
enter
to confirm
this step.
If you are using ImmunoCAP Specific IgE Negative control as quotient, type 0
for Range minimum.
NOTE!
If expected mean value, expected standard deviation and maximal
allowed standard deviation have been defined, the Range minimum will be
overridden.
Range maximum
The following step describes how you can change the highest allowed concen-
tration. It is also possible to deactivate this function.
1.
In Edit QC mode press
10
.
5.2.9.2.Edit QC [sIgE/sIgE Pos]
1.Status?
5.2.9.2.Edit QC [sIgE/sIgE Pos]
9.Range minimum?
5.2.9.2.Edit QC [sIgE/sIgE Pos]
Range minimum: 2.8
5.2.9.2.Edit QC [sIgE/sIgE Pos]
1.Status?
5.2.9.2.Edit QC [sIgE/sIgE Pos]
Limit s: 3
5.2.9.2.Edit QC [sIgE/sIgE Pos]
8.Limit s?