Thermo Scientific Phadia 100, User Manual

Page: 163 / 357

Assay Run Quality Control Phadia 100 - User Manual
P a g e 6 . 1 2 12-3501-20/12
4.5.1.Export Quality control-logs
INSERT MEDIA AND PRESS ENTER
4.5.ImmunoCAP<->PC
1.Export Quality control-logs?
4.5.1.Export Quality control-logs
Method: ImmunoCAP Specific IgE 0-100?
4.4.3.Edit Calibrator Point [sIgE]
Point: CAL-0.35?
4.4.3.Edit Calibrator Point [sIgE]
Response: (2) 58.3_
4.
Press
no
until the calibra-
tor point you want appears and
then press
yes
.
5.
Type the new response of
the calibrator point and press
enter
.
If you want to recall the original response press
enter
and
shift
at the same time.
If you want to exit without any changes done press
mode
. The number of
replicates are displayed.
Export Quality Control-Logs
1.
In the Export Quality con-
trol-log mode press
yes
.
2.
Press
no
until the method
you want appears, then press
yes
.
Warnings that may prevent entering
NO QUALITY CONTROL-LOGS EXIST
There are no QC logs for the selected method.
CANNOT SELECT THIS METHOD
The selected method cannot be used for this operation.
3.
Insert a USB memory or a
diskette, or connect an external
USB hard drive, and press
en-
ter
.
NOTE! Use only one of the USB ports on the
front at a time.
The quality control-log for the selected method will be exported.