Thermo Scientific Phadia 100, User Manual

Page: 94 / 357

Phadia 100 - User Manual Assay Run Editing Functions
12-3501-20/12 Page 4.3
3
4
5
6
4
Change Dilution for Sample
1.1.Enter Request [24]
Enter Dilution Factor:1_
1.1.Enter Request [24]
Sample Dilution:INSTRUMENT DILUTION?
1.1.Enter Request [24]
Enter Sample ID:3627_
1.1.Enter Request [24]
Sample Dilution:PREDILUTED?
The following steps describes how you change the replicate and dilution for a
sample when you are in Enter Request in the Prepare Run mode.
1.
You can change the dilu-
tion factor for a sample by typ-
ing the sample identity and then
pressing
shift
and
enter
keys
at the same time. In this case all
tests on this sample will be di-
luted.
2.
Press
yes
if you want to
add a prediluted sample, other-
wise press
no
. If yes go to step
4.
If predilution is selected the dilution factor can be 1-1000.
3.
Press
yes
if you want the
instrument to perform the dilu-
tion, otherwise
no
.
If you select instrument dilution the dilution factor can only be 1, 2, 5, 10, 20,
50 or 100.
4.
Type the dilution factor
and press
enter
.
5.
Enter the test names or
test panel names by typing them
one at a time and press
enter
to
confirm each test name.
6.
To save the entered tests
for the sample identity, press
enter
one more time.
Regarding dilutions, see also chapter 3, Reagent and Sample Handling and the
corresponding Directions for Use.
3627 (sIgE) Test:_ [24]
3627 (sIgE) Test:f1_ [21]
t3, w1, g6