Thermo Scientific Phadia 100, User Manual

Page: 111 / 357

Assay Run Editing Functions Phadia 100 - User Manual
P a g e 4 . 2 0 12-3501-20/12
To reach this function, you first have to login with the laboratory password (the
password at delivery is “unicap”).
It is recommended to use the minimum and maximum range values given in the
Directions for Use for the Quality Control, or for EliA on the package certificate.
1.
In Prepare Run mode
press
5
.
2.
In Method Setup mode
press
yes
.
3.
Press
2
.
4.
In Edit Method mode
press
yes
.
5.
Select the method for
which you want to define a
Quality Control by pressing
no
until the desired method is dis-
played. Then press
yes
.
6.
Press
9
.
7.
In Quality control mode
press
yes
.
8.
In Add QC mode press
yes
.
9.
Choose if the Quality Con-
trol is to be set as ACTIVE,
MANUAL or INACTIVE by
pressing
no
until the desired sta-
tus is displayed. Then press
yes
.
ACTIVE means that the Quality Control will be added to all assay runs for the
selected method, INACTIVE means that the Quality Control will not be added
and MANUAL means that the Quality Control will be added if you decide so,
when an assay run is prepared.
Add QC
5.Method Setup
2.Edit Method?
5.Method Setup
1.Add Method?
5.2.Edit Method
Method: ImmunoCAP Specific IgE 0-100?
5.2.Edit Method
Please wait...
5.2.Edit Method [sIgE]
1.General parameters?
5.2.Edit Method [sIgE]
9.Quality control?
Phadia 100 Ver.3.0 14:10:17
5.Method Setup?
Phadia 100 Ver.3.0 14:10:17
1.Prepare Run?
5.2.9.Quality control [sIgE]
1.Add QC?
5.2.9.1.Add QC [sIgE]
Status: ACTIVE?