Thermo Scientific Phadia 100, User Manual

Page: 31 / 357

Instrument Specification and Installation Phadia 100 - User Manual
P a g e 1 . 2 8 12-3501-20/12
4.
Press
yes
.
5.
Enter the TCP/IP Address,
then press
Enter
.
6.
Press
Enter
to return to
the selection menu.
7.
Press
no
until 7 is dis-
played.
8.
Press
yes
.
9.
Enter the TCP/IP Port (de-
fault port is 5004), then press
Enter
.
Configure computer name
When using more than one Phadia 100 in the same network, the computer name
has to be set. To enter this menu you need access to the laboratory password.
Follow the steps below when you set the computer name.
1.
In Install/Service mode
press
8
.
2.
Press
yes
.
3.
Enter the computer name
(in this example BARU1431),
then press
Enter
.
6.7.6.IDM TCP/IP Address
Enter Address:
6.7.6.IDM TCP/IP Address
Enter Address:192.168.0.10
6.7.Communication parameters COM2
7.IDM TCP/IP Port?
6.7.6.IDM TCP/IP Port
Enter Port:
6.7.6.IDM TCP/IP Port
Enter Port: 5004
6.7.Communication parameters COM2
8.Computer name?
6.7.8.Computer
Computer name:
6.7.8.Computer
Computer name: BARU1431