Thermo Scientific Phadia 100, User Manual

Page: 344 / 357

Phadia 100 - User Manual Repacking
12-3501-20/12 Page 13.3
13
Repacking Instructions
6.
Screw the spacers to the
instrument before attaching
the bottom plate. Use the four
hexagonal screws you find in
the plastic bag to attach the
bottom plate to the instru-
ment.
4.
Put tape around the instrument to re-
duce vibration during tranportation. Start at
the back, continue over the front and fasten
it under the instrument.
5.
Place the instrument on a table, resting on its back
side. Unscrew the four feet from the bottom and remove
them.
3.
Put the cushion under the Pipette Arm. Place it on the
Sample Carousel Cover and fasten it with tape.
2.
Make sure the Washing Solution, Rinse Solution and
Waste Bottles are empty.
Remove the Biohazard label from the Waste Container.
Fasten the Sample Carousel Cover, the Printer Lid and the
Rinse Solution, Washing Solution and Waste Bottles with
tape.
1.
Take out the ImmunoCAP Waste Con-
tainer from the Processing Chamber. Empty
it and put it in the accessory box.
Take out the Elution Wells Disc and the
ImmunoCAP Holder Disc from the process-
ing chamber and put them in the accessory
box.
Remove the Sample Carousel from the in-
strument and put it in the accessory box.
Instrument feet
Hexagonal screws
Wooden bottom plate
Spacer (between the wooden
bottom plate and the instrument)
T a b l e