Thermo Scientific Phadia 100, User Manual

Page: 270 / 357

Phadia 100 - User Manual Maintenance
12-3501-20/12 Page 11.19
2
5
6
11
Load Printer Paper
Turn the instrument on. Open the printer lid and take out the old paper roll.
View from the right hand
side of the Printer
Paper roll
Paper holder
Instrument
body
1.
Take new Printer Paper
(ArtNo.12-3501-05). Cut the
end of the new paper roll to
form an arrow. Fit the roll pin
in the new paper roll.
2.
Unroll ~10 cm of paper
from the roll. Insert the end of
the paper into the paper inlet of
the paper holder. Place the pa-
per roll in position.
3.
When the paper is visible
in the paper collection area of
the paper holder, push it for-
ward.
4.
When you can see the tip
of the paper coming out of the
printer, do not pull it out by
hand. Use instead the paper
feed button which you find on
the right side of the keyboard. If
the paper is pulled out by hand,
the printer is easily damaged.
Extra paper rolls (ArtNo. 12-3501-05) are included in the accessories box.
NOTE!
Make sure that the paper roll is inserted in the right direction.
View from above with
Printer lid open