manualshive.com logo in svg

Sharp MX-C310, Operation Manual, Page: 670 / 706

Share
Download
Sharp MX-C310 Operation Manual Download Page 670

7-3

TROUBLESHOOTING

Contents

HOW TO REMOVE MISFEEDS

If you require more information when reading the instructions in the display, see the paper misfeed illustrations below. 
Refer to the illustration below and then go to the appropriate illustration (1 to 10) for your situation.

☞

(1): page 7-3, (2)-(8): page 7-4, (9)-(10): page 7-5

(1) Original misfeed

Open the document feeder 
cover and remove the paper 
feed roller.
If it is difficult to remove 
misfed paper, remove the 
paper feed roller. To remove 
the paper feed roller, see 
"

Removing the paper feed 

roller

".

Pull out the document feeder 
tray and remove the misfed 
paper.

Open the automatic 
document feeder and 
remove the original.

Removing the paper feed roller

Lift up the knob that holds
the roller shaft.

Pull down the release lever.

Remove the shaft rotating 
the roller cover upward and 
remove the shaft.

When removing a misfeed or closing a cover, tray, or the finisher, take care that your fingers do not become pinched.

(1)

(2)

(10)

(5)

(9)

(3)

(4)
(6)

(6), (7)

After removing the misfeed, open and close the 
automatic document feeder (or the document feeding 
area cover or document feeder tray) to clear the 
misfeed display from the display.

Paper 
feed roller

• If the roller cover is not pointing straight up when 

the shaft is removed, a failure may occur.

• Carefully pull the misfed paper out without tearing it.

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments