Home
/
Sharp
/
MX-C310
/
Operation Manual

Sharp MX-C310, Operation Manual, Page: 119 / 706

Share

Page: 119 / 706

Sharp MX-C310 Operation Manual Download Page 119

2-21

COPIER

Contents

COLOUR COPY MODES

The colour mode of the [COLOUR START] key is normally set to [Full Colour] so that copying takes place in full colour
mode when the [COLOUR START] key is pressed. If colour originals are mixed together with black & white originals, set
the colour mode to [Auto] to have the colour mode change appropriately for each original.
Select the [Colour Mode] key in the base screen to open the following screen.

Select the key of the desired colour mode.

Full Colour

The original is copied in full colour.

Auto

The machine automatically detects whether each original is colour or black & white and
switches the mode appropriately (full colour for a colour original or black & white for a black &
white original).

Single Colour

The original is copied in the selected colour only.
All colours in the original are changed to the selected colour, which can be selected from red,
green, blue, cyan, magenta, or yellow.

2 Colour

Only the red areas of the original are changed to the selected colour; colours other than red
are copied in black. This lets you make copies that are more expressive than black and white
copies.
Red, green, blue, cyan, magenta, or yellow can be selected.

«
...
117
118
119
120
121
...
»

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments