Sharp MX-C310 Operation Manual Download Page 506

Page: 506 / 706

5-85

SCANNER/INTERNET FAX

Contents

SCANNING BOTH SIDES OF A CARD ONTO
A SINGLE PAGE (Card Shot)

This function lets you send the front and reverse sides of a card as a single page, without the need to send each side
separately.

Keys in the display can be selected with the arrow keys and the [OK] key.

• When using card shot, the original must be placed on the document glass.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

Place the original face down on the
document glass.

Specify the destination.

☞

ENTERING DESTINATIONS

(page 5-22)

When scanning to USB memory, there is no need to specify the destination. Go to step 3.

Select the special modes.

(1) Select the [Mode Switch] key.

(2) Select the mode that you wish to use.

(3) Select the [Special Modes] key.

(4) Select the [Card Shot] key.

☞

SPECIAL MODES

(page 5-77)

Transmission

Front

Back

Scanned image

Originals

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-C310

Reviews:

Sharp MX-C310, Operation Manual, Page: 506 / 706

Search results

Summary of Contents for MX-C310

Reviews: