manualshive.com logo in svg

Sharp MX-C310, Operation Manual, Page: 453 / 706

Share
Download
Sharp MX-C310 Operation Manual Download Page 453

5-32

SCANNER/INTERNET FAX

Contents

SENDING AN IMAGE IN SCAN MODE

This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to 
Desktop, and Scan to Network Folder).

Keys in the display can be selected with the arrow keys and the [OK] key.

TRANSMITTING AN IMAGE

When a default address is configured in "Default Address Setting" (Web page only) in the system settings (administrator), the 
mode cannot be changed, the destination cannot be changed, and destinations cannot be added. If you wish to change the 
mode or recipient, select the [Cancel] key in the display, press the [OK] key, and then follow the procedure below.

1

Place the original.

• When placing the originals, orient them as shown below.

* To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the 

placement orientation in step 3.

• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and 

sent in a single transmission.

1

1

1

1

1

1

Document feeder tray

Place the original face up.

Portrait orientation*

Landscape orientation

Document glass

Place the original face down with the middle 
aligned with the tip of the 

 mark at the middle of 

the scale on the left side of the document glass.

Originals

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments