Sharp MX-C310, Operation Manual, Page: 142 / 706

2-44
COPIER
Contents
2
Place the original face down on the
document glass.
3
Select the special modes.
(1) Select the [Special Modes] key.
(2) Select the [Card Shot] key.
☞
Special modes menu (1st screen) (page 2-39)
4
Select card shot settings.
(1) Enter the original size.
Select the X (width) number display and press the [OK]
key. A number entry screen will appear. Enter the width of
the original with the numeric keys, and select the [OK] key
in the number entry screen.
Set the Y (height) original size in the same way as the X
(width) original size.
You can also change the number with the
keys.
• The [Size Reset] key can be pressed to return the
horizontal and vertical dimensions to the values set in
"Card Shot Settings" in the system settings (administrator).
• To enlarge or reduce the image to fit the paper based
on the entered original size, set the [Fit to Page]
checkbox to
.
(2) Select the [Basic Menu] key.
You will return to the base screen of copy mode. Make sure
that the entered dimensions appear in the [Original] key.
B
A
A B
A
B
B
A
Results
Originals
Front page
Back page
Front page
Back page
OK BACK
(1)
(2)