Sharp MX-C310 Operation Manual Download Page 332

Page: 332 / 706

4-41

FACSIMILE

Contents

• When the speaker is used, transmission takes place without scanning the original into memory.

• A destination that includes an F-code (sub-address and passcode) cannot be used.

• A one-touch key that has multiple destinations or has a non-fax destination cannot be used.

System Settings (Administrator): Speaker Settings

The default volume level of the speaker can be changed in the "Speaker Settings".

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-C310

Reviews:

Sharp MX-C310, Operation Manual, Page: 332 / 706

Search results

Summary of Contents for MX-C310

Reviews: