Sharp MX-C310, Operation Manual, Page: 369 / 706

4-78
FACSIMILE
Contents
4
Specify the original size.
(1) Enter the original size.
• Select the X (width) numeric value display key and
enter the width.
• Select the Y (height) numeric value display key and
enter the height.
(A) To return the original size to the default size, select
the [Size Reset] key.
(B) To have the image automatically enlarged or reduced
to the send size, select the [Fit to Send Size]
checkbox
. The checkbox does not need to be
selected if you wish to scan at the entered original
size.
(2) Select the [Basic Menu] key.
• You can also select the keys to change the number.
• The send size is automatically selected based on the original size you entered.
• After selecting card scan, you can change the scan size and the send size from the [Scan Size] key and [Send Size]
key in the base screen. In this case, the screen of this step will appear in the scan size setting screen. For the
procedure for setting the send size, see "
Specifying the send size of the original " (page 4-55).
5
Press the [BLACK & WHITE START] key to scan the front of the card.
To cancel scanning...
Press the [STOP] key ( ).
6
Turn the card over so that the back is face down, and press the [BLACK &
WHITE START] key to scan the back of the card.
Before scanning the back of the card, you can select the [Configure] key in the display to change the exposure.
To cancel scanning...
Press the [STOP] key ( ).
OK BACK
(1) (A)
(2)
(B)
X
Y