manualshive.com logo in svg

Sharp MX-C310, Operation Manual, Page: 460 / 706

Share
Download
Sharp MX-C310 Operation Manual Download Page 460

5-39

SCANNER/INTERNET FAX

Contents

SENDING AN IMAGE IN USB MEMORY MODE

Follow the steps below to send a scanned image to a commercially available USB memory device that has been 
connected to the machine. This stores the file in the USB device.

Keys in the display can be selected with the arrow keys and the [OK] key.

• Use a FAT32 USB memory with a capacity of no more than 32 GB.

• When a default address is configured in "Default Address Setting" (Web page only) in the system settings (administrator), 

the mode cannot be changed. To switch to USB memory mode, select the [Cancel] key in the display, press the [OK] key, 
and follow the steps below.

1

Connect the USB memory to the USB 
connector (Type A) on the machine.

2

Place the original.

• When placing the originals, orient them as shown below.

* To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the 

placement orientation in step 4.

• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and 

sent in a single transmission.

1

1

1

1

1

1

Document feeder tray

Place the original face up.

Portrait orientation*

Landscape orientation

Document glass

Place the original face down with the middle 
aligned with the tip of the 

 mark at the middle of 

the scale on the left side of the document glass.

Originals

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments