Sharp MX-C310 Operation Manual Download Page 474

Page: 474 / 706

5-53

SCANNER/INTERNET FAX

Contents

Specify the destination.

(1) Select the [Address] key in the base screen.

(2) Select the [Address Book] key.

(3) Select the one-touch key of the desired

destination.

(4) Select the delivery method.

The destination is specified.

(5) Repeat steps (3) and (4) until all

destinations are selected.

• To send by Cc or Bcc delivery, the [Cc] key or [Bcc] key must be specified in the screen that appears in (3).

• If "Must Input Next Address Key at Broadcast Setting" is enabled in the system settings (administrator), select the

[Next Address] key before specifying the next destination.

• one-touch keys that cannot be used for broadcast transmission are greyed out to prevent selection.

• If a Scan to FTP (Hyperlink) address is specified in a broadcast transmission, hyperlink e-mail transmission will not

take place.

• If you frequently use broadcasting to send images to the same group of destinations, it is convenient to store those

destinations in a group key.

Select the [Address Review] key.

Check the destinations and then select
the [BACK] key.

If there are Cc or Bcc recipients, the recipients can be checked by selecting the

keys.

To cancel a specified destination...

Select the one-touch key of the destination that you wish to cancel. A message will appear to confirm the deletion.
Select the [Yes] key.

☞

CHECKING AND DELETING THE SELECTED DESTINATIONS

(page 5-25)

BACK

AAA AAA

BBB BBB

CCC CCC

DDD DDD

EEE EEE

FFF FFF

GGG GGG

HHH HHH

(2)

(1)

(3)

BACK

AAA AAA

BBB BBB

CCC CCC

DDD DDD

EEE EEE

FFF FFF

GGG GGG

HHH HHH

BACK

AAA AAA
BBB BBB

CCC CCC
DDD DDD

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-C310

Reviews:

Sharp MX-C310, Operation Manual, Page: 474 / 706

Search results

Summary of Contents for MX-C310

Reviews: