Sharp MX-C310, Operation Manual, Page: 516 / 706

5-95
SCANNER/INTERNET FAX
Contents
4
Select job build mode.
(1) Set the [Job Build] checkbox to
.
(2) Select the [Basic Menu] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the
first set of originals.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
Insert the next set of originals and press the [COLOUR START] key or the
[BLACK & WHITE START] key.
Press the [START] key pressed in step 5.
Repeat until all originals have been scanned.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared.
7
Select the [Read-End] key.
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
• The [Configure] key can be selected to change the exposure, resolution, scan size, and send size for each original
page scanned.
If the memory becomes full during scanning, a message will appear and the transmission will be cancelled.
To cancel the job build function....
Set the [Job Build] checkbox to in the screen of step 4.
OK BACK
(2)
(1)
OK BACK