manualshive.com logo in svg

Sharp MX-C310, Operation Manual, Page: 350 / 706

Share
Download
Sharp MX-C310 Operation Manual Download Page 350

4-59

FACSIMILE

Contents

This section explains the basic procedures for receiving faxes.

RECEIVING FAXES

When the reception mode is set to "Auto Reception", the machine will receive and print faxes automatically. The fax 
reception mode is displayed in the base screen.

FAX RECEPTION

• When fax reception is in progress, it is possible to reserve a transmission by performing the transmission in memory 

transmission mode.

☞

TRANSMISSION METHODS

 (page 4-29)

• When a fax smaller than A4 (8-1/2" x 11") size is received, the size of the paper used for printing will vary depending on the 

orientation (vertical or horizontal) in which the sender placed the original.

•

System Settings: 

Fax Data Receive/Forward

 (page 6-97)

This is used to change the fax reception mode. "Auto Reception" should normally be used.
Select "Manual Reception" when an extension phone is connected to the machine.

•

System Settings (Administrator): Allow/Reject Number Setting

You can store numbers and specify whether or not reception is allowed from those numbers.

This shows the current fax 
reception mode and the amount 
of free memory remaining.

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments