manualshive.com logo in svg

Sharp MX-C310, Operation Manual, Page: 584 / 706

Share
Download
Sharp MX-C310 Operation Manual Download Page 584

6-37

SYSTEM SETTINGS

Contents

OPERATION PANEL (ADMINISTRATOR)

List Print (Administrator)

This is used to print lists and reports that are only for use by the administrator of the machine. Select the [List Print 
(Administrator)] key to configure the settings.

Image Sending Activity Report

The following Image Sending Activity Reports can each 
be separately printed.

• Image Sending Activity Report (Scan)
• Image Sending Activity Report (Internet Fax)
• Image Sending Activity Report (Fax)

Data Receive/Forward List

The following lists showing reception settings and 
forwarding settings can be printed.

• Anti Junk Fax Number List
• Anti Junk Mail/Domain Name List
• Inbound Routing List
• Document Admin List

User Information Print

User lists, usage count lists, usage limit group lists, and 
other lists related to user control can be printed.

• User  List
• List of Number of Pages Used
• Page Limit Group List
• Authority Group List
• Favourite Operation Group List
• All User Information Print

Summary of Contents for MX-C310



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments