manualshive.com logo in svg

Renesas SH7616, Hardware Manual

The Renesas SH7616 is a high-performance microcontroller, equipped with advanced features for seamless functionality. Unlock its full potential by accessing the comprehensive Hardware Manual. Easily available for free download at manualshive.com, this manual provides detailed instructions and insights, enabling users to maximize the capabilities of this exceptional product.

Share
Download
background image

Rev. 2.00  Mar 09, 2006  page xiv of xxvi

5.3.18 Vector Number Setting Register L (VCRL) ........................................................ 175
5.3.19 Vector Number Setting Register M (VCRM) ...................................................... 176
5.3.20 Vector Number Setting Register N (VCRN)........................................................ 177
5.3.21 Vector Number Setting Register O (VCRO)........................................................ 178
5.3.22 Vector Number Setting Register P (VCRP)......................................................... 179
5.3.23 Vector Number Setting Register Q (VCRQ)........................................................ 180
5.3.24 Vector Number Setting Register R (VCRR) ........................................................ 181
5.3.25 Vector Number Setting Register S (VCRS)......................................................... 182
5.3.26 Vector Number Setting Register T (VCRT) ........................................................ 183
5.3.27 Vector Number Setting Register U (VCRU)........................................................ 184
5.3.28 Interrupt Control Register (ICR).......................................................................... 187
5.3.29 IRQ Control/Status Register (IRQCSR) .............................................................. 188

5.4

Interrupt Operation............................................................................................................ 190
5.4.1

Interrupt Sequence ............................................................................................... 190

5.4.2

Stack State after Interrupt Exception Handling.................................................... 192

5.5

Interrupt Response Time................................................................................................... 192

5.6

Sampling of Pins 

IRL3

–

IRL0

........................................................................................... 194

5.7

Usage Notes ...................................................................................................................... 195

Section 6   User Break Controller (UBC)

....................................................................... 199

6.1

Overview........................................................................................................................... 199
6.1.1

Features................................................................................................................ 199

6.1.2

Block Diagram..................................................................................................... 200

6.1.3

Register Configuration......................................................................................... 201

6.2

Register Descriptions ........................................................................................................ 203
6.2.1

Break Address Register A (BARA) ..................................................................... 203

6.2.2

Break Address Mask Register A (BAMRA)........................................................ 204

6.2.3

Break Bus Cycle Register A (BBRA).................................................................. 205

6.2.4

Break Address Register B (BARB) ..................................................................... 207

6.2.5

Break Address Mask Register B (BAMRB) ........................................................ 208

6.2.6

Break Bus Cycle Register B (BBRB) .................................................................. 209

6.2.7

Break Address Register C (BARC)...................................................................... 211

6.2.8

Break Address Mask Register C (BAMRC) ........................................................ 212

6.2.9

Break Data Register C (BDRC) ........................................................................... 214

6.2.10 Break Data Mask Register C (BDMRC).............................................................. 215
6.2.11 Break Bus Cycle Register C (BBRC) .................................................................. 217
6.2.12 Break Execution Times Register C (BETRC) ..................................................... 218
6.2.13 Break Address Register D (BARD) ..................................................................... 219
6.2.14 Break Address Mask Register D (BAMRD)........................................................ 220
6.2.15 Break Data Register D (BDRD)........................................................................... 222

Summary of Contents for SH7616








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SH7616

Dahua DHI-NVR5224-24P-4KS2 Quick Start Manual preview
DHI-NVR5224-24P-4KS2
Brand: Dahua Pages: 24
Hama 39707 Operating Instruction preview
39707
Brand: Hama Pages: 4
3Com 3CRSHPW196 User Manual preview
3CRSHPW196
Brand: 3Com Pages: 16
Moxa Technologies UC-8100 Series Hardware User Manual preview
UC-8100 Series
Brand: Moxa Technologies Pages: 19
Black Box JPM083A Manual preview
JPM083A
Brand: Black Box Pages: 9
Kanguru Data Bank User Manual preview
Data Bank
Brand: Kanguru Pages: 13
ZALMAN CNPS7700 LED User Manual preview
CNPS7700 LED
Brand: ZALMAN Pages: 9
Crystal Vision TANDEM HD-21 User Manual preview
TANDEM HD-21
Brand: Crystal Vision Pages: 54
mikroElektronika Pressure click Quick Start Manual preview
Pressure click
Brand: mikroElektronika Pages: 2
NAMCO SOUL CALIBUR II Manual preview
SOUL CALIBUR II
Brand: NAMCO Pages: 26
Logicube ZCLONE User Manual preview
ZCLONE
Brand: Logicube Pages: 56
Active Communications ACS express Quick Start Manual preview
ACS express
Brand: Active Communications Pages: 10
Rockwell Automation Trusted T8833 Manual preview
Trusted T8833
Brand: Rockwell Automation Pages: 21
DFRobot FIT0677 Assembly Manual preview
FIT0677
Brand: DFRobot Pages: 30
Xilinx MP3 NG Application Note preview
MP3 NG
Brand: Xilinx Pages: 27
Pilz PNOZ mc3p Operating Instructions Manual preview
PNOZ mc3p
Brand: Pilz Pages: 12
Multi-Link Power Stone Programming Manual preview
Power Stone
Brand: Multi-Link Pages: 31
MicroNova O047 Technical Installation Manual preview
O047
Brand: MicroNova Pages: 113

Brands by name

Popular brands

Load more brands