manualshive.com logo in svg

Renesas SH7616, Hardware Manual

The Renesas SH7616 is a high-performance microcontroller, equipped with advanced features for seamless functionality. Unlock its full potential by accessing the comprehensive Hardware Manual. Easily available for free download at manualshive.com, this manual provides detailed instructions and insights, enabling users to maximize the capabilities of this exceptional product.

Share
Download
background image

Rev. 2.00  Mar 09, 2006  page xiii of xxvi

4.6.3

Instructions in Repeat Loops................................................................................ 140

4.7

Stack Status after Exception Handling.............................................................................. 141

4.8

Usage Notes ...................................................................................................................... 142
4.8.1

Value of Stack Pointer (SP) ................................................................................. 142

4.8.2

Value of Vector Base Register (VBR) ................................................................. 142

4.8.3

Address Errors Caused by Stacking of Address Error Exception Handling ........ 142

4.8.4

Manual Reset during Register Access.................................................................. 142

Section 5   Interrupt Controller (INTC)

........................................................................... 143

5.1

Overview........................................................................................................................... 143
5.1.1

Features................................................................................................................ 143

5.1.2

Block Diagram ..................................................................................................... 143

5.1.3

Pin Configuration................................................................................................. 145

5.1.4

Register Configuration......................................................................................... 145

5.2

Interrupt Sources ............................................................................................................... 146
5.2.1

NMI Interrupt....................................................................................................... 147

5.2.2

User Break Interrupt............................................................................................. 147

5.2.3

H-UDI Interrupt ................................................................................................... 147

5.2.4

IRL Interrupts....................................................................................................... 147

5.2.5

IRQ Interrupts ...................................................................................................... 148

5.2.6

On-chip Peripheral Module Interrupts ................................................................. 152

5.2.7

Interrupt Exception Vectors and Priority Order ................................................... 152

5.3

Register Descriptions ........................................................................................................ 159
5.3.1

Interrupt Priority Level Setting Register A (IPRA) ............................................. 159

5.3.2

Interrupt Priority Level Setting Register B (IPRB).............................................. 160

5.3.3

Interrupt Priority Level Setting Register C (IPRC).............................................. 161

5.3.4

Interrupt Priority Level Setting Register D (IPRD) ............................................. 162

5.3.5

Interrupt Priority Level Setting Register E (IPRE) .............................................. 163

5.3.6

Vector Number Setting Register WDT (VCRWDT) ........................................... 164

5.3.7

Vector Number Setting Register A (VCRA)........................................................ 165

5.3.8

Vector Number Setting Register B (VCRB) ........................................................ 166

5.3.9

Vector Number Setting Register C (VCRC) ........................................................ 166

5.3.10 Vector Number Setting Register D (VCRD)........................................................ 167
5.3.11 Vector Number Setting Register E (VCRE) ........................................................ 168
5.3.12 Vector Number Setting Register F (VCRF)......................................................... 169
5.3.13 Vector Number Setting Register G (VCRG)........................................................ 170
5.3.14 Vector Number Setting Register H (VCRH)........................................................ 171
5.3.15 Vector Number Setting Register I (VCRI)........................................................... 172
5.3.16 Vector Number Setting Register J (VCRJ) .......................................................... 173
5.3.17 Vector Number Setting Register K (VCRK)........................................................ 174

Summary of Contents for SH7616








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SH7616

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Brand: Canon Pages: 30
D-Link PCMCIA WIRELESS ASAPTER DWL-650 Quick Install Manual preview
PCMCIA WIRELESS ASAPTER DWL-650
Brand: D-Link Pages: 5
D-Link PowerLine DHP-W611AV User Manual preview
PowerLine DHP-W611AV
Brand: D-Link Pages: 78
Magma PE6R4-I Quick Installation Manual preview
PE6R4-I
Brand: Magma Pages: 2
Yamaha mLAN Driver Manual Book preview
mLAN Driver
Brand: Yamaha Pages: 24
Yamaha DSP1D Supplementary Manual preview
DSP1D
Brand: Yamaha Pages: 5
Intel NetStructure ZT 5515 Product Specification preview
NetStructure ZT 5515
Brand: Intel Pages: 90
Delta Electronics DTE-20T Instruction Sheet preview
DTE-20T
Brand: Delta Electronics Pages: 1
HARTING HAIIC MICA Hardware Development Manual preview
HAIIC MICA
Brand: HARTING Pages: 13
Sans Digital ELITENAS EN104L+(B) Quick Installation Manual preview
ELITENAS EN104L+(B)
Brand: Sans Digital Pages: 9
Supero AOC-1UIPMI-B User Manual preview
AOC-1UIPMI-B
Brand: Supero Pages: 53
TDK Powereta iQP Series Product Brief preview
Powereta iQP Series
Brand: TDK Pages: 2
Homeworks HQP7-RF-2 Installation Instructions Manual preview
HQP7-RF-2
Brand: Homeworks Pages: 24
LevelOne FSW-0512 Specification Sheet preview
FSW-0512
Brand: LevelOne Pages: 2
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Brand: PairGain Pages: 7
NETGEAR ReadyNAS Duo v2 Software Manual preview
ReadyNAS Duo v2
Brand: NETGEAR Pages: 100
Sony Ericsson GC86 Quick Start Manual preview
GC86
Brand: Sony Ericsson Pages: 2
JETWAY JNLH61S-6C Series User Manual preview
JNLH61S-6C Series
Brand: JETWAY Pages: 36

Brands by name

Popular brands

Load more brands