33
Guided Setup offers a simple way to complete initial CC-SG
configuration tasks once the network configuration is complete. The
Guided Setup interface leads you through the process of defining
Associations, discovering and adding devices to CC-SG, creating device
groups and node groups, creating user groups, assigning policies and
privileges to user groups, and adding users. Once you have completed
Guided Setup, you can always edit your configurations individually.
Guided Setup is divided into four tasks:
Associations - Define the categories and elements that you use to
organize your equipment. See
Associations in Guided Setup
(on
page 34).
Device Setup - Discover devices in your network and add them to
CC-SG. Configure device ports. See
Device Setup
(on page 34).
Create Groups - Categorize the devices and nodes that CC-SG
manages into groups and create full access policies for each group.
See
Creating Groups
(on page 36).
User Management - Add users and user groups to CC-SG, and
select the policies and privileges that govern user access within
CC-SG and to devices and nodes. See
User Management
(on page
38).
See
Naming Conventions
(on page 389) for details on CC-SG's rules
for name lengths.
In This Chapter
Before You Use Guided Setup ................................................................ 33
Associations in Guided Setup ................................................................. 34
Device Setup ........................................................................................... 34
Creating Groups ...................................................................................... 36
User Management ................................................................................... 38
Before You Use Guided Setup
Before proceeding with CC-SG configuration, you must complete system
configuration.
Configure and install Dominion series and IP-Reach appliances (both
serial and KVM devices), including assigning an IP address.
Chapter 4
Configuring CC-SG with Guided
Setup
