Chapter 8: Nodes, Node Groups, and Interfaces
118
VI Client Interfaces
VMware Viewer Interfaces
Virtual Power Interfaces
RDP, VNC, and SSH Interfaces, if specified
b. Enter login credentials, if needed. Some interface types do not
require login credentials.:
To use a Service Account, select the Use Service Account
Credentials checkbox then select the name of the service
account.
or
Enter a username and password for the interface type.
Maximum 64 characters each.
15. Click OK.
CC-SG creates:
One node for each virtual machine. Each virtual machine node
has a VMW Viewer interface, a VMW Power interface, and any
other in-band interfaces you specified. Virtual machine nodes
are named with their virtual machine names from the virtual host
systems.
One node for each virtual host. Each virtual host node has a VI
Client interface. Virtual host nodes are named with their IP
addresses or host names.
Edit Control Systems, Virtual Hosts, and Virtual Machines
You can edit the control systems, virtual hosts, and virtual machines
configured in CC-SG to change their properties. You can delete virtual
machine nodes from CC-SG by deselecting the Configure checkbox for
the virtual machine.
Note: To change the node name for a virtual host or control system
node, edit the node. See
Edit a Node
(on page 110). The name change
also displays in the Virtualization table.
To edit control systems, virtual hosts, and virtual machines:
1. Choose Nodes > Virtualization.
2. Click the column header to sort the table by that attribute in
ascending order. Click the header again to sort the table in
descending order.
Optional.
3. Select the control system or virtual host you want to edit.
4. Click Edit.
