![background image](http://html1.mh-extra.com/html/omron/c200hw/c200hw_operation-manual_742329065.webp)
3-3
Section
Setting Data and Starting
52
The operating memory area is the area that is automatically specified when the
PCU’s unit number is set (Unit #0).
04
Wd 100
Direct operation is started by the
RELATIVE MOVEMENT command
(i.e., by the turning ON of bit 10004).
RELATIVE MOVEMENT
•
For details regarding the operating memory area, refer to
4-4 Operating
Memory Area
.
•
In this example, the direct operation method is used. For details regarding
direct operation, refer to
Section 7 Direct Operation
.
Summary of Contents for C200HW
