RELEASE 3.0 SYSTEM UTILITIES
16-42
Edition One
XC1000 Service
Get Logical Address
Enter Drive Number[S0–S3, M0–M6]: s1
Enter Cylinder Number(HEX): 48
Enter Head Number(HEX): 0
Enter Sector Number(HEX): 0
Logical Address is:–
Software datafile subtype 00 area A record 0000
Press any key to continue.
Figure 16-40. Example of the Prompts and Responses
for the Get Logical Address Utility.
16.9 MESSAGE UTILITIES
Use Message Utilities to provide options for displaying message and phrase
blocks and for converting a message ID to a physical address. Type the
corresponding menu-item number at the
Enter Choice:
prompt on menu
20 to access the Message Utilities menu. Figure 16-41 shows the Message
Utilities menu.
– Message Utilities –
1 – Display Message Blocks
2 – Display Phrase Blocks
3 – Message Id to Physical Address
Enter Choice:
Figure 16-41. Message Utilities Menu.
16.9.1 Display Message Blocks
Use the Display Message Blocks utility to display the contents of a selected
message, as follows:
1. From the Message Utilities menu (Figure 16-41), type the number
corresponding to the Display Message Blocks utility.
2. At the
Enter Message Id (Hex):
prompt, enter the message ID, in
hexadecimal.
3. At the
Scramble Code (Hex):
prompt, enter the scramble code, in
hexadecimal.
4. At the
Enter start address (0–4FFF) [hex]:
prompt, enter the start
address, in hexadecimal. The XC1000 displays the contents of the
selected message.
SECTION 16.8 – 16.9
Summary of Contents for XC1000
