Octel XC1000, Service Manual, Page: 696 / 889

RELEASE 4.X FCP CONVERSION INSTRUCTIONS
17-10 Release 4.X XC1000 Service
If errors are displayed while the following validity checks
and garbage collect are being performed, correct them
before continuing the FCP conversion. Otherwise, the FCP
conversion will fail.
Caution!
3. Type
0
and press
Return
to select
0
–
Validity check user records
.
a. At ENTER “Y” TO CONFIRM USER RECORD VALIDITY CHECK: ,
type
y
and press
Return
.
b. When CHECK DONE
–
PRESS ANY KEY TO CONTINUE appears
on the screen, press Return . The > prompt reappears.
c. At the
>
prompt, type reformat and press Return . The Reformat
menu (Figure 17-46 or Figure 17-47) appears again.
4. Type 10 and press Return to select 10 – Check user records vs. AMT .
a. At ENTER “Y” TO CONFIRM UR/AMT CROSS CHECK: , type y
and press Return .
b. When CHECK DONE – PRESS ANY KEY TO CONTINUE appears,
press Return . The > prompt reappears on the screen.
c. At the
>
prompt, type reformat and press Return . The Reformat
menu (Figure 17-46 or Figure 17-47) appears again.
5. Type 11 and press Return to select 11 – Check AMT addresses vs.
internal record numbers
.
a. At ENTER “Y” TO CONFIRM AMT/UR CROSS CHECK: , type y
and press Return .
b. When CHECK DONE – PRESS ANY KEY TO CONTINUE appears,
press
Return
. The
>
prompt reappears on the screen.
c. At the
>
prompt, type reformat and press Return . The Reformat
menu (Figure 17-46 or Figure 17-47) appears again.
6. Type 4 and press Return to select 4 – Garbage collect .
a. At ENTER “Y” TO CONFIRM GARBAGE COLLECTION: , type y
and press Return to continue.
b. At ENTER DRIVE # TO GARBAGE COLLECT (0–15) OR ANY
KEY FOR ALL DRIVES: , press Return to run garbage collect on
all drives.
c. At ENTER “Y” TO CHANGE USER RECORDS AND UPDATE
FREE SPACE TABLES, ENTER “N” TO LEAVE SYSTEM
UNCHANGED:
, type y and press Return to continue.
d. When
GARBAGE COLLECTION SUCCESSFUL...PRESS ANY KEY
TO CONTINUE appears, press Return .
e. Press ^ C to return to the SMT Main Menu.
SECTION 17.6