Octel XC1000, Service Manual, Page: 806 / 889

EPROM COMPATIBILITY APPENDIX E
E-3 Edition One XC1000 Service
Table E-1. XC1000 Compatibility Among the Production-Released Logic Card,
the Software Release, and the EPROM (Concluded).
Logic Card and Part
Numbers
Software Release and
XC1000 Type
a
EPROM
Location
EPROM Part Number and Revision Checksum
V3–1 Monitor Card
P/N 244–2030–000
c,
P/N 244–2030–002
c
,
P/N 244–2030–001,
Rev B2 or later
b
P/N 244–2030–005
2.10
b
1.20
1.5X (NSR)
Above 1.55 (SR)
U7N
U7N
U7N
U7N
P/N 039–1267–002, Rev 9003
P/N 039–1380–000, Rev 9100
P/N 039–1380–001, Rev 9202
P/N 039–1380–003, Rev 9307
CA12
A167
0E19
2E47
V3–2 Monitor Card (SR
a
)
P/N 244–2030–003
c
1.54X, 1.55 (SR)
Above 1.55 (SR) U7N
U7N P/N 039–1380–001, Rev 9202
P/N 039–1380–003, Rev 9307 0E19
2E47
Monitor–5 Card
P/N 244–2030–005
d
Above 1.55 (SR) U7N P/N 039–1380–003, Rev 9307 2E47
Digital Line Card (DLC)
P/N 244–2003–000,
P/N 244–2003–001
P/N 244–2003–0XX
2.10
b
1.20, 1.3X, 1.5X (NSR)
1.54X, 1.55 and
above (SR)
Low: U16J
High: U14J
Low: U16J
High: U14J
P/N 039–1270–001, Rev 9003
P/N 039–1271–001, Rev 9003
P/N 039–1270–004, Rev 9201
P/N 039–1271–004, Rev 9201
3190
3D4F
D15A
9444
Universal Digital Line
Card (UDLC)
P/N 244–2058–0XX
2.0X and above Low: U51
High: U52 P/N 039–1441–000, Rev 9302
P/N 039–1440–000, Rev 9302 A752
0IE7
T1 TIC
P/N 244–2002–000
P/N 244–2002–0XX
2.10
b
, 1.20, 1.3X,
1.5X (NSR), 1.54X,
1.55 (SR)
Above 1.55 (SR)
Low: U5T
High: U5U
Low: U5T
High: U5U
P/N 039–1289–000, Rev 9000
P/N 139–1290–000, Rev 9000
P/N 039–1289–002, Rev 9303
e
P/N 039–1290–002, Rev 9303
e
9812
A199
9812
A199
Optional ACP Card
(available with kit only,
P/N 278–1087–010)
P/N 244–2039–000,
P/N 244–2039–0XX 1.5X (NSR),
1.55 and above (SR) 386 EPROM
Low: U18J
High: U16J
188 EPROM
U2D
P/N 039–1372–000, Rev 9101
P/N 039–1373–000, Rev 9101
P/N 039–1408–001, Rev 9203
422B
BFF2
172A
a
NSR indicates a Non-Standby-Redundant XC1000; SR indicates a Standby-Redundant XC1000.
b
Nonprotected-mode software release preceding the Release 1 protected-mode software.
c
Obsolete.
d
The C20 CPU P/N 244–2053–012 or –025 is required with the F20 file card P/N 244–2054–011 and the monitor–5 card
P/N 244–2030–005. However, the C20 CPU can be used with other file cards and monitor cards.
e
Jumper J1 on T1 TIC must be moved to support 64K ROM operations.