Octel XC1000, Service Manual

Page: 417 / 889

SYSTEM UTILITIES
9-34 Edition One XC1000 Service
8. From the Main Menu, type the current date as the menu selection, in
the format mmdd. Press the Enter key.
9. At the
>
prompt, turn on continuous-mode printing by pressing the
Copy Pr key on the HP terminal or the Ctrl , Shift , and Print keys,
simultaneously, on the Wyse 50 terminal. This allows the results of
the garbage-collect utility to be printed. All screens will begin printing,
starting with the reformat menu.
10. At the
>
prompt, type
REFORMAT
and press the
Enter
key.
11. When the reformat menu appears (Figure 9-9), type 4 and press the
Enter
key to select the Garbage-collect option.
12. When the ENTER “Y” TO CONFIRM GARBAGE COLLECTION: prompt
appears, type
Y
and press the
Enter
key.
13. Run garbage collect on all message drives by pressing the Enter key
when the
ENTER DRIVE # TO GARBAGE COLLECT (0–15) OR ANY
KEY FOR ALL DRIVES: prompt appears.
14. Garbage collect consists of two passes. After the first pass is com-
plete, scramble codes (SC) and I/O errors are reported on a screen
similar to Figure 9-12. If any errors are detected during the first pass,
contact the Octel Communications Technical Assistance Center. If
no
errors are detected, type Y at the ENTER “Y” TO CHANGE USER
RECORDS AND UPDATE FREE SPACE TABLES prompt, and press
the
Enter
key to continue to the second pass.
ENTER DRIVE # TO GARBAGE COLLECT (0–15) OR ANY KEY FOR ALL DRIVES:
BEGIN GARBAGE COLLECT (ALL PORTS ARE CLEAR) . . .
BEGIN FIRST PASS
# SC ERRORS = 0
# I/O ERRORS = 0
# MESSAGES (DESTINATIONS) = 13
# OF USERS WITH ERROR = 0
# OF NODES WITH ERROR = 0
ENTER “Y” TO CHANGE USER RECORDS AND UPDATE FREE SPACE TABLES,
ENTER “N” TO LEAVE SYSTEM UNCHANGED:
Figure 9-12. Garbage Collect, First Pass.
15. When the second pass is completed, a screen similar to Figure 9-13
appears. If SC or I/O errors are reported during the second pass, call
the Octel Communications Technical Assistance Center.
16. When the GARBAGE COLLECTION SUCCESSFUL prompt appears, turn
off continuous-printing mode by pressing the Copy Pr key on the HP
terminal or the Ctrl , Shift , and Print keys on the Wyse 50 terminal.
SECTION 9.7