Octel XC1000, Service Manual

Page: 400 / 889

SYSTEM UTILITIES
9-17 Edition One XC1000 Service
The following is an example of control-bus messages that can be
displayed:
CB PACKET TRACE BUFFER (OLDEST FIRST):
CARD 0 O:
00 00 28 00 0C 00 00 00 28 00 00 00 00 94 53 80
CARD 0 I: 00 00 29 00 00 28 14 E0 D0 FD 00 00 00 A6 28 00
CARD 0 O: 00 00 5A 02 01 00 00 00 28 00 00 00 00 96 48 80
CARD 0 I: 00 00 5B 00 00 28 49 99 F5 6A FF FF 00 49 47 00
END OF BUFFER
PRESS ANY KEY TO CONTINUE
If no messages are in the buffer, the message TRACE BUFFER EMPTY
is displayed.
3. Press any key to return to the INSTALL OPTIONS: menu.
This utility is the same as the utility-option P (section 9.4.5.8). The
function can be performed by selecting option P from the INSTALL
OPTIONS; menu or the DISK UTILITY OPTIONS: menu.
9.4.11 Install-Option S – SYSTEM EXPANSION UTILITY
Use the system-expansion utility to increase the number of languages
supported. Although shown on the screen, options A, B, and C (CDR,
group list, and name storage expansion, respectively) are set at maximum
capacity at the factory and cannot be changed.
1. Select option S from the INSTALL OPTIONS: menu. The SYSTEM
EXPANSION OPTIONS: menu appears, as shown in Figure 9-5.
SYSTEM EXPANSION OPTIONS:
A - CDR EXPANSION
B - GROUP LIST EXPANSION
C - NAME STORAGE EXPANSION
D - NUMBER OF LANGUAGE EXPANSION
X - EXIT
SELECT OPTION:
Figure 9-5. SYSTEM EXPANSION OPTIONS: Menu.
2. Select option
D
to increase the number of languages available to two
or three languages. The following prompt is displayed:
LANGUAGE EXPANSION OPTIONS:
2 – EXPAND TO 2 LANGUAGES
3 – EXPAND TO 3 LANGUAGES
SELECT OPTION:
3. Enter
2
or
3
in the
SELECT OPTION:
field. The following prompt
appears:
EXECUTE EXPANSION OF NUMBER OF LANGUAGES
CONTINUE (Y OR N)?
SECTION 9.4