Octel XC1000, Service Manual

Page: 556 / 889

RELEASE 2.X UPGRADE INSTRUCTIONS
13-36 Edition One XC1000 Service
29. When the COPY OPTIONS: menu appears, type
B
and press the
Enter
key to select the PHRASES option, which copies the phrases from
system-drive 0 to system-drive 1.
Use suboptions B.A.A when copying phrases from
system-drive 0 to system-drive 1. All phrases and
languages must be copied at this time. If any other
options are selected, errors will occur during phrase
access.
Caution!
30. Type A and press the Enter key to copy all phrases.
31. Answer the prompts as they appear.
32. Verify that the serial numbers displayed for the source and destination
drives are correct, then type Y to continue.
33. Type
A
and press the
Enter
key to copy all languages.
34. When the PRESS ANY KEY TO CONTINUE prompt appears, press any
key to return to the COPY OPTIONS: menu.
35. Type X and then press the Enter key. The ENTER BOOT COMMAND:
prompt appears.
36. Boot the XC1000 with a
B
to refresh, then boot with an
A
. Booting
the XC1000 can be a lengthy process; the duration depends on the
system configuration.
13.17.7 Run Online Validity Checks
After the XC1000 has been upgraded to Release 2.X, the validity checks
and garbage collect can be run while the XC1000 is on line. Running
validity checks and garbage collect can cause a long delay. Perform the
following steps to run validity checks:
1. At the
>
prompt, turn on continuous-mode printing by pressing the
Copy Pr key on the HP terminal or the Ctrl, Shift , and Print keys,
simultaneously, on the Wyse 50 terminal. This allows the results of
the validity-check and garbage-collect utilities to be printed. All
screens will be printed, starting with the reformat menu.
2. Reconnect any other terminals to the XC1000 that were disconnected
in section 13.17.4.
3. At the > prompt, type REFORMAT and press Enter . The reformat
menu appears (Figure 13-20).
4. When the reformat menu appears, type 0 and press the Enter key to
select the Validity check user records option.
5. When the prompt ENTER “Y” TO CONFIRM USER RECORD VALIDITY
CHECK appears, type Y and press the Enter key.
SECTION 13.17