Octel XC1000, Service Manual

Page: 846 / 889

INDEX
Index-11 Edition One XC1000 Service
Decimal, binary, and hexadecimal
conversions, 4-22
Decrease Datafile Size menu, 16-39, 16-40
Decrease Datafile Size utility (Release 3.0),
16-39, 16-40
Decreasing CDR buffer size, 16-39, 16-40
DEC VT102 terminal
see also System manager terminal (SMT)
communication parameters, 4-16, 4-17
keyboard use, 4-4, 4-5
selecting, 4-23
Terminal-Setup menu, 4-16
DEC VT220 terminal
see also System manager terminal (SMT)
communication parameters, 4-16, 4-18
keyboard use, 4-4, 4-5
selecting, 4-23
Define CPU Serial Channel menu
see Menu 6.3
DE-INSTALL DRIVE (install-option B), 9-5
De-Install Drive utility (Release 3.0), 16-23,
16-24
Delete key, 4-4
Delete UPG from Hard Drive option (Release
3.02 online help), 15-24
Deleting
see Removing
Diagnostic jacks in TICs, 10-22, 10-24, 10-25
Diagnostics
see External diagnostic tools; Startup
diagnostics; Testing; Troubleshooting
Dialing and Serial Channel Parameters menu
see Menu 6
Dialing Sequence for International Calls:
field, 4-45, 4-46
Dialing Sequence for Local Calls: field, 4-45
Dialing Sequence for On-PBX Calls (if
VPMOD is on a PBX): field, 4-45
Dialing Sequence for Private Network Calls:
field, 4-46
Dialing sequences
in-band integration, 4-48, 4-49
international calls, 4-45, 4-46
local calls, 4-45
pagers, 4-46 through 4-48
BBL-type, 4-46
dialing-sequence codes, 4-47, 4-48
Spectrum-type, 4-46
private network calls, 4-46
reconnect, 4-45
transfer, 4-45
Dialing Sequence to Activate Message
Waiting: field, 4-49
Dialing Sequence to Deactivate Message
Waiting: field, 4-49
Dialing Sequence to Transfer a Call: field,
4-45
DIC (RDAC command), 6-35
DID TICs
see Direct-inward-dial (DID) TICs;
Telephone interface cards (TICs)
Digital line-card groups, 10-14
Digital line cards (DLCs)
adding cards, 8-8, 8-9
associated with ATICs or DID TICs, 2-9
boot-process display, 4-25, 4-26
described, 1-3, 10-15, 10-16
EPROM replacement, 8-9 through 8-11
hot-plug, 1-3
line-card groups, 10-14, 10-15
line-configuration test, 4-26
logic-bay-slot assignments, 3-30 through
3-34, 3-36, 10-3
port assignments, 4-35, 4-36
R2 integrations, 1-5
Release 1.55 requirement, 12-2
Release 2.X requirement, 13-3
Release 3.02 FCP conversion
requirements, 14-5, 14-6
Release 3.02 online upgrade
requirements, 15-3
replacing cards
after shutdown, 8-2 through 8-5
hot-plug, 8-5 through 8-8
status-code port, task/source, and
channel correlation, 7-55, 7-56
tests, 6-18
Digital TICs, 10-16
Digit, hexadecimal, 7-2
Digit Sequence for Direct Calls: field, 4-49
Digit Sequence for Forward: field, 4-49
D–D