Octel XC1000, Service Manual

Page: 627 / 889

RELEASE 3.02 ONLINE UPGRADE INSTRUCTIONS
15-21 Edition One XC1000 Service
Floppy Disk: Enter letter of the floppy drive used to load UPG files from
diskettes, A: or B:
Hard Drive: Enter letter of the hard drive used to store UPG files, C: or D:
Directory: Enter the default directory path where the UPG files are stored,
ex: \PCUPG\UPG
Display Type: Enter the PC monitor display type, M = monochrome or C =
color.
COM Port: Enter the PC COM port physically connecting the voice-proces-
sing module.
Baud Rate: Enter the voice-processing module SMT port’s set baud rate,
9600 or 19200.
To accept ALL values, after inputted properly, press <Enter> through all the
fields, and <Enter> again to accept.
15.16.4 Select UPG Directory (Utilities Menu)
By selecting this option, the user is prompted to select a UPG Directory.
The selected UPG Directory is placed in a buffer for subsequent operations
to be performed within the “Utilities Menu”, or subsequent operations to be
performed within the “Copy/Delete UPG Menu”.
15.16.5 Read Upgrade Information
This option allows the user to display more detailed information regarding
the contents of a selected UPG Directory (created from software or phrase
diskettes) on the hard drive (as specified in the “Setup Menu”).
Upon first selecting this option, the user is prompted to select a UPG
Directory (or, if the “Select UPG Directory” option was selected prior, the
software will assume the same previously selected UPG Directory).
The software then prompts the user with an option to display the informa-
tion as mapped to the physically attached voice-processing module, or
independent of the voice-processing module. Upon answering this prompt,
the more detailed upgrade information is displayed (i.e, regarding release
versions, languages, etc.). To return to the “Utilities Menu”, the user should
press <Enter>.
15.16.6 Copy or Delete UPG
By selecting this option, the user is displayed the “Copy/Delete UPG Menu”
with the following options:
Select UPG Directory
Load UPG To Hard Drive
Copy UPG To Diskettes
Delete UPG From Hard Drive
Change Default Directory
SECTION 15.16