Octel XC1000, Service Manual

Page: 717 / 889

RELEASE 4.X FCP CONVERSION INSTRUCTIONS
17-31 Release 4.X XC1000 Service
Menu 20 – Service Operations
– Drive Verify Utilities –
Enter Choice:
1 – Software Verify
2 – Phrase Verify
3 – Drive Verify
Figure 17-70. Menu 20.1, Drive Verify Utilities.
If any errors result from the drive verification(s), they must
be corrected before continuing the FCP conversion. Call the
Octel TAC immediately. You will need their assistance to
determine the appropriate recovery action. Do not attempt
to correct the problem(s) yourself.
Caution!
32. At Enter Choice: , type the number for Drive Verify and press Enter .
This option verifies both software and phrase areas.
a. At Enter position of drive to be verified [S0–S1]: , type S0 and
press
Enter
. The drive serial number is displayed.
b. Verify that the serial number is correct. If it is correct, type y
and press Enter at the Is this the correct drive? (y/n): prompt.
The drive verification begins.
c. When the verification is complete, press any key to return to the
Drive Verify Utilities
menu.
33. After verifying the system drive, press Enter at the Enter Choice:
prompt. A screen similar to the one shown in Figure 17-69 reappears.
34. Type
3
to select
3 – SMT Debug Utilities
and press
Enter
. A screen
similar to the one shown in Figure 17-71 appears.
Menu 20 – Service Operations
– Main Menu (within Verification) –
Enter Choice:
1 – Miscellaneous Utilities
2 – Datafile Utilities
3 – Message Utilities
4 – Display Status Log
5 – SMT Debug Utilities
6 – Toggle Extended Print
7 – Exit
Figure 17-71. Menu 20 – Service Operations
(Within Verification).
SECTION 17.9