Octel XC1000, Service Manual, Page: 691 / 889

RELEASE 4.X FCP CONVERSION INSTRUCTIONS
17-5 Release 4.X XC1000 Service
If F10 file cards are installed, the following EPROMs (2 sets for a
single-cabinet XC1000 or 4 sets for a dual-cabinet redundant XC1000)
must be on hand for installation during the FCP conversion:
Low byte, P/N 039-1274-003, revision 9306 or higher
High byte, P/N 039-1275-003, revision 9306 or higher.
F20 file cards are P/N 044–2054–XXX,* with the following EPROMs:
Low byte, P/N 039-1400-001, revision 9311
High byte, P/N 039-1401-001, revision 9311.
If F20 file cards are installed, the following EPROMs (2 sets for a
single-cabinet XC1000 or 4 sets for a dual-cabinet redundant XC1000)
must be on hand for installation on each file card during the FCP
conversion:
Low byte, P/N 039-1400-003, revision 9314 or higher
High byte, P/N 039-1401-003, revision 9314 or higher.
-
DLC-1 card, P/N 044–2003–XXX,* with the following EPROMs:
Low byte, P/N 039-1270-004, revision 9201 or higher
High byte, P/N 039-1271-004, revision 9201 or higher.
or for FaxAgent
t
, UDLC12-31S-Mod 10, P/N 044–2058–XXX,* with the
following EPROMs:
Low byte, P/N 039-1441-000, revision 9302 or higher
High byte, P/N 039-1440-000, revision 9302 or higher.
-
V3 monitor card, P/N 044–2030–XXX,* with EPROMs 039–1380–003,
revision 9307 or higher.
-
T1 TIC, P/N 044–2002–XXX,* with the following EPROMs:
Low byte, P/N 039-1289-000, revision 9000 or higher
High byte, P/N 039-1290-000, revision 9000 or higher.
-
For ACP support, ACP-10 card, P/N 044–2039–XXX,* with the
following EPROMs:
Low byte, P/N 039-1372-000, revision A (9101) or higher
High byte, P/N 039-1373-000, revision A (9101) or higher
Two 188 code, P/N 039–1408–001, revision 9302 or higher.
17.3.2 Software
Names of software and phrase diskettes depend on the configuration,
languages supported, and specific 4.X release. The “X’s” in the names used
in this chapter indicate variable characters. The following software for the
PC is required to perform an FCP conversion:
-
FCP conversion tool 1.02 or higher, P/N 116
–
1085
–
XXX.
-
Software diskette(s). For example, MS4XXXXX.SSU,
P/N 316
–
0017
–
XXX, diskettes are for mainstream software.
* The XXX denotes variation cards with the same base number. The cards with variations are also acceptable.
SECTION 17.3