Octel XC1000, Service Manual

Page: 278 / 889

STATUS LOG
7-35 Edition One XC1000 Service
14 FEB 93 02:27:11PM
*** Integration Error
>>> INVESTIGATE SYSTEM ENVIRONMENT
00000 82C09102 F9000000 65002743 45470100
00010 30010000 00000000 30010000 FFFF0000
00020 00000000 0000FFFF 30750000 00000000
00030 91000500 91003331 062FFF00 00000000
00040 A6008600 91000361 3331062F FFFF2FFF
00050 A8770000 00000000 10000000 1E000000
00060 E4FFFFFF 10000000 19010000 34003400
00070 00000000 55008002 EC040000 CC005000
00080 0F00
Figure 7-31. Example of Status-Code F9.
Table 7-17. Status-Code F9 Subcodes at Offsets 08 and 09.
Subcode
Value
Description
01 Error reported by the DLC
02 Unrecognized response from DLC
03 Wrong incoming message
04 Bad digit in ACP message
05 Error code in input/output request block (IORB) from operating system
06 Unexpected message from ACP
07 Bad return from ACIO
08
a
No dial tone detected for PID

/R
09 Integration timeout
0A Continuous incoming message
0B Incoming queue overflow
0C Too many digits in dial request
0D Nonzero return code in CIP message
0E Incoming integration message on port marked “no” for incoming calls in menu 4
0F Incoming integration message on nonintegrated port (nonintegrated line type)
10 Bad return from line card
11 Error writing to line card
12 APID

/85 failed to send incoming call after sending alerting message
13 APID/85 message-waiting queue failure
14 Failed to get in-band dial tone
30 Error code in INT response
31 ACP card timeout
51 Length of variable error
60 Unexpected integration message
61 Integration timeout
62 Unknown return code from ACIO routine
63 Continuous incoming message
64 Operating system error
65
a
Integration status message
66 Error code in INT response message
67 Queue overflow
68 Line status error from MID
69
a
Line disabled by MID
a
Explained further in this section.
SECTION 7.3