OPTIONAL FEATURES
11-7
Edition One
XC1000 Service
4
3
2
1
8
7
6
5
SIERRA
J50
P/N 057–1
174–000
1200-BAUD MODEMS
REMOTE
TERMINALS*
1200-BAUD
OCTEL
SERVICE
TERMINAL
MTA PC
LOCAL 9600-BAUD TERMINALS*
LOCAL SMT
SERVICE
MODEM
PORT BOX
P/N 057–1236–000
P/N 057–1236–000
P/N 057–1236–000
P/N 057–1236–000
P/N 057–1236–000
P/N 057–1236–000
* 9600- AND1200-BAUD TERMINALS CAN BE LOCALLY OR REMOTELY LOCATED.
IF EITHER ARE LOCAL, NULL-MODEM ADAPTERS MUST BE USED.
NULL-MODEM ADAPTERS
P/N 046–1380–000
Figure 11-3. Example of MTA Configuration.
The Busy-Out Controller is an encased relay apparatus located directly
below the +12-Vdc power supply unit, at the lower left corner of cabinet 1
in a single or dual-cabinet XC1000. The Busy-Out Controller acts as a
signal relay from the XC1000 to the switch and notifies the switch of any
problem conditions on the TIC/DLC pairs in the XC1000. Refer to
Installation Instruction 181–1104–000
,
Revision B for more details and
installation and configuration procedures for the Busy-Out Controller.
Additional features available with the Busy-Out Controller include power-fail
detection and optional automatic out-of-service (OOS) detection. If a power
failure occurs, the controller automatically busies all ports on the XC1000.
If the optional OOS detection is implemented, the switch can detect an OOS
alarm from the XC1000 and automatically busies all ports on the XC1000.
SECTION 11.5
Summary of Contents for XC1000
