manualshive.com logo in svg

Motorola MPC8260 PowerQUICC II, User Manual

The Motorola MPC8260 PowerQUICC II is a cutting-edge embedded processor, designed to deliver superior performance and efficiency. To fully explore the extensive features and capabilities of this advanced product, be sure to download the comprehensive User Manual for free from our website manualshive.com.

Share
Download
background image

MOTOROLA

Chapter 2.  PowerPC Processor Core

  

2-5

Part I. Overview

¥

Integrated power management

Ñ Three power-saving modes: doze, nap, and sleep
Ñ Automatic dynamic power reduction when internal functional units are idle

¥

Deterministic behavior and debug features

Ñ On-chip cache locking options for the instruction and data caches (1Ð3 ways or 

the entire cache contents can be locked)

Ñ In-system testability and debugging features through JTAG and boundary-scan 

capability

Figure 

2-1 shows how the execution unitsÑIU, BPU, LSU, and SRUÑoperate

independently and in parallel. Note that this is a conceptual diagram and does not attempt
to show how these features are physically implemented on the chip. 

The processor core provides address translation and protection facilities, including an
ITLB, DTLB, and instruction and data BAT arrays. Instruction fetching and issuing is
handled in the instruction unit. The MMUs translate addresses for cache or external
memory accesses.

2.2.1  Instruction Unit

As shown in Figure 2-1, the instruction unit, which contains a fetch unit, instruction queue,
dispatch unit, and the BPU, provides centralized control of instruction ßow to the execution
units. The instruction unit determines the address of the next instruction to be fetched based
on information from the sequential fetcher and from the BPU. 

The instruction unit fetches the instructions from the instruction cache into the instruction
queue. The BPU extracts branch instructions from the fetcher and uses static branch
prediction on unresolved conditional branches to allow the instruction unit to fetch
instructions from a predicted target instruction stream while a conditional branch is
evaluated. The BPU folds out branch instructions for unconditional branches or conditional
branches unaffected by instructions in progress in the execution pipeline.

Instructions issued beyond a predicted branch do not complete execution until the branch
is resolved, preserving the programming model of sequential execution. If any of these
instructions are to be executed in the BPU, they are decoded but not issued. Instructions to
be executed by the IU, LSU, and SRU are issued and allowed to complete up to the register
write-back stage. Write-back is allowed when a correctly predicted branch is resolved, and
instruction execution continues without interruption on the predicted path. If branch
prediction is incorrect, the instruction unit ßushes all predicted path instructions, and
instructions are issued from the correct path.

2.2.2  Instruction Queue and Dispatch Unit

The instruction queue (IQ), shown in Figure 2-1, holds as many as six instructions and
loads up to two instructions from the instruction unit during a single cycle. The instruction
fetch unit continuously loads as many instructions as space in the IQ allows. Instructions

Summary of Contents for MPC8260 PowerQUICC II















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MPC8260 PowerQUICC II

IEI Technology PCIE-Q470 Quick Installation Manual preview
PCIE-Q470
Brand: IEI Technology Pages: 19
IEI Technology KINO-DH420 User Manual preview
KINO-DH420
Brand: IEI Technology Pages: 87
IEI Technology HPE-4S2 Quick Installation Manual preview
HPE-4S2
Brand: IEI Technology Pages: 3
Magma PE6R4-I Quick Installation Manual preview
PE6R4-I
Brand: Magma Pages: 2
National Instruments NI 9426 Getting Started Manual preview
NI 9426
Brand: National Instruments Pages: 17
Aleratec 310108 Quick Start Manual preview
310108
Brand: Aleratec Pages: 12
Qlogic QMC2462S Datasheet preview
QMC2462S
Brand: Qlogic Pages: 2
N.A.T. NAT-MCH Technical Reference Manual preview
NAT-MCH
Brand: N.A.T. Pages: 32
Cypress Semiconductor CY62148E Specification Sheet preview
CY62148E
Brand: Cypress Semiconductor Pages: 10
XJTAG XJLink2-CFM User Manual preview
XJLink2-CFM
Brand: XJTAG Pages: 9
Xilinx Zynq-7000 Manual preview
Zynq-7000
Brand: Xilinx Pages: 8
Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN User Manual preview
HIRESCHMANN IT MAMMUTHUS MTM8003-FAN
Brand: Belden Pages: 84
OWC Mercury FireWire 400 Owner'S Manual preview
Mercury FireWire 400
Brand: OWC Pages: 2
Loopcomm LP-8014 Quick Start Manual preview
LP-8014
Brand: Loopcomm Pages: 2
IEI Technology TANK-101B User Manual preview
TANK-101B
Brand: IEI Technology Pages: 116
Me VS-M1 Instructions Manual preview
VS-M1
Brand: Me Pages: 28
Link electronics Analog Pulse Generator 812-OP/H Specification Sheet preview
Analog Pulse Generator 812-OP/H
Brand: Link electronics Pages: 2
Spectrum Digital XDS510USB Installation Manual preview
XDS510USB
Brand: Spectrum Digital Pages: 11

Brands by name

Popular brands

Load more brands