manualshive.com logo in svg

Motorola MPC8260 PowerQUICC II, User Manual

The Motorola MPC8260 PowerQUICC II is a cutting-edge embedded processor, designed to deliver superior performance and efficiency. To fully explore the extensive features and capabilities of this advanced product, be sure to download the comprehensive User Manual for free from our website manualshive.com.

Share
Download
background image

MOTOROLA

Chapter 27.  Multi-Channel Controllers (MCCs)

  

27-19

Part IV.  Communications Processor Module

Table 27-13 describes MCCE Þelds. 

27.10.1.1  Interrupt Table Entry

Each interrupt table entry, shown in Figure 27-14, contains information about channel-
speciÞc events. The transmit circular table shows only events caused by transmission; the
receive circular tables shows only events caused by reception.

Table 27-13. MCCE/MCCM Register Field Descriptions 

Bits

Name

Description

0

QOV0

QOVxÑReceive interrupt queue overßow. IQOV is set (and an interrupt request generated) by the 
CP whenever an overßow occurs in the transmit circular interrupt table. This occurs if the CP tries to 
update an interrupt entry that was not handled by the user (such an entry is identiÞed by V = 1).
RINTxÑReceive interrupt. When RINT = 1, the MCC generated at least one new entry in the receive 
interrupt circular table. After clearing it, the user reads the next entry from the receive interrupt 
circular table and starts processing a speciÞc channelÕs exception. The user returns from the 
interrupt handler when it reaches a table entry with V = 0.

1

RINT0

2

QOV1

3

RINT1

4

QOV2

5

RINT2

6

QOV3

7

RINT3

8Ð11

Ñ

Reserved, should be cleared.

12

TQOV

Transmit interrupt queue overßow. TQOV is set (and interrupt request generated) by the CP 
whenever an overßow occurs in the transmit circular interrupt table. This condition occurs if the CP 
attempts to write a new interrupt entry into an entry that was not handled by the user. Such an entry 
is identiÞed by V = 1.

13

TINT

Transmit interrupt. When TINT = 1, at least one new entry in the transmit interrupt circular table was 
generated by MCC. After clearing it, the user reads the next entry from the transmit interrupt circular 
table and starts processing a speciÞc channelÕs exception. The user returns from the interrupt 
handler when it reaches a table entry with V = 0.

14

GUN

Global transmitter underrun. When set, this ßag indicates that an underrun occured in the MCCÕs 
transmitter FIFO buffer. This error is fatal, since it is unknown which channels were affected. 
Following the assertion of GUN in the MCCE the MCC stops transmitting data in all channels. The 
TDM Tx line becomes idle. The MCC transmitters must be reinitialized after this error. If enabled in 
MCCM, an interrupt request is generated when GUN is set. The user must clear GUN.

15

GOV 

Global receiver overrun. When GOV = 1, an overrun occured in the MCCÕs receiver FIFO buffer. This 
error is fatal, since it is unknown which channels were affected. When GOV = 1, the MCC stops 
receiving data in all channels. No more data is transferred to memory. The MCC receivers must be 
re-initialized after this error. If enabled in MCCM, an interrupt request is generated when GOV is set. 
The user must clear GOV bit.

Summary of Contents for MPC8260 PowerQUICC II















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MPC8260 PowerQUICC II

Jabra A330 Multiuse User Manual preview
A330 Multiuse
Brand: Jabra Pages: 15
Paradox ZX32D Manual preview
ZX32D
Brand: Paradox Pages: 4
Harmonic XOS User Manual preview
XOS
Brand: Harmonic Pages: 56
Industrex M43ic Instruction Manual preview
M43ic
Brand: Industrex Pages: 51
EK-Quantum Momentum ROG Strix X570-E D-RGB User Manual preview
Momentum ROG Strix X570-E D-RGB
Brand: EK-Quantum Pages: 10
UNA AUTOMATION DIFRA Installation Manual preview
DIFRA
Brand: UNA AUTOMATION Pages: 20
Hama 00039747 Operating Instruction preview
00039747
Brand: Hama Pages: 6
NEC Thin Client US310e Getting Started preview
Thin Client US310e
Brand: NEC Pages: 6
Z3 Technology Z3-SBE264-10 User Instructions preview
Z3-SBE264-10
Brand: Z3 Technology Pages: 67
Advantech 3718HG User Manual preview
3718HG
Brand: Advantech Pages: 68
Microchip Technology DM240316 Quick Start Manual preview
DM240316
Brand: Microchip Technology Pages: 9
Anthem Audio SFD-2 MkIII Jumper Configurations preview
SFD-2 MkIII Jumper
Brand: Anthem Audio Pages: 2
Omron NJ501-1300 User Manual preview
NJ501-1300
Brand: Omron Pages: 432
Billion BiPAC 5200S RC Series User Manual preview
BiPAC 5200S RC Series
Brand: Billion Pages: 79
IceTech POD-51EH-C541U-12 Operating Instructions Manual preview
POD-51EH-C541U-12
Brand: IceTech Pages: 8
Intel IXP28 Series Manual preview
IXP28 Series
Brand: Intel Pages: 154
Extron electronics VERSATOOLS MTP User Manual preview
VERSATOOLS MTP
Brand: Extron electronics Pages: 19
Multi-Link Power Stone Programming Manual preview
Power Stone
Brand: Multi-Link Pages: 31

Brands by name

Popular brands

Load more brands