Mitsubishi Electric MELSERVO-J3W Series, Instruction Manual

Page: 448 / 500

15. MR-J3W-0303BN6 SERVO AMPLIFIER
15 - 43
15.5.4 Other function parameters (No.PF
)
POINT
Each parameter name of Other function parameters (No.PF ) are displayed as
manufacturer settings in the parameter setting window of MR Configurator and MR
Configurator2. However, you can set parameter No.PF06 and PF12. The other
parameters are for manufacturer. Do not change them.
No. Symbol Name and function
Each/
common
Default
value
Unit
Setting
range
PF06 *FOP5 Function selection F-5
Electronic dynamic brake selection
Electronic dynamic brake selection
0: Automatic setting
2: Disabled
Set Electronic dynamic brake operating time with
parameter No.PF12 (DBT).
Setting "0" enables the electronic dynamic brake.
0 0 0
Each 0000h Refer to
Name
and
function
column.
PF12 DBT Electronic dynamic brake operating time
Set a operating time for the electronic dynamic brake.
Communication with the controller cannot be made during the electronic dynamic
brake operation due to SSCNET communication brake.
When reconnecting servo amplifier to the communication, be sure to perform after
the setting value of the electronic dynamic brake operating time has passed and
after checking that the motor has stopped. Each 100 ms 0 to
10000
15.5.5 Option setting parameters (No.Po
)
POINT
Each parameter name of Option setting parameters (No.Po ) are displayed as
manufacturer settings in the parameter setting window of MR Configurator and MR
Configurator2. However, you can set parameter No.Po04. The other parameters
are for manufacturer. Do not change them.
No. Symbol Name and function
Each/
common
Default
value
Unit
Setting
range
Po04 **OOP
2
Function selection O-2
0 0
HG-AK servo motor main circuit power supply selection
0: 48VDC selection
1: 24VDC selection
Select a voltage to connect to the main circuit power supply
for connecting a HG-AK servo motor.
When using a HG-AK servo motor with 24VDC, set the
parameter to "1 ".
Overvoltage (33.1) will occur if "1 " is set and used with
48VDC.
0
Common 0000h Refer to
Name
and
function
column.