Mitsubishi Electric MELSERVO-J3W Series, Instruction Manual

Page: 286 / 500

13. USING A LINEAR SERVO MOTOR
13 - 37
13.6.1 Parameter write inhibit (Parameter No.PA19)
POINT
Turn off the power and then on again, or reset the controller after setting the
parameter to validate the parameter value.
In the factory setting, this servo amplifier allows changes to the all parameters, settings. With the setting of
parameter No.PA19, write can be disabled to prevent accidental changes.
The next table indicates the parameters which are enabled for reference and write by the setting of parameter
No.PA19. Operation can be performed for the parameters marked .
Parameter
No.PA19
setting
Setting
operation
Basic setting
parameters
No.PA
Gain/filter
parameters
No.PB
Extension setting
parameters
No.PC
I/O setting
parameters
No.PD
Special setting
parameters
No.PS
Option setting
parameter
No.Po
Reference
0000h
Write
Reference 000Bh
(factory setting)
Write
Reference
000Ch
Write
Reference
000Dh
Write
Reference
000Eh
Write
Reference
100Bh
Write
Parameter
No.PA19 only
Reference
100Ch
Write
Parameter
No.PA19 only
Reference
100Dh
Write
Parameter
No.PA19 only
Reference
100Eh
Write
Parameter
No.PA19 only