Mitsubishi Electric MELSERVO-J3W Series, Instruction Manual

Page: 285 / 500

13. USING A LINEAR SERVO MOTOR
13 - 36
13.6 Parameters
CAUTION
Never adjust or change the parameter values extremely as it will make operation
instable.
When the fixed values are indicated for any digits of a parameter, never change the
values of the digits.
In this servo amplifier, the parameters are classified into the following groups on a function basis.
Parameter group Main description
Basic setting parameters
(No.PA
)
When using this servo amplifier in the position control mode.
Gain/filter parameters
(No.PB
)
Use these parameters when making gain adjustment manually.
Extension setting parameters
(No.PC
)
When changing settings such as analog monitor output signal, use these parameters.
I/O setting parameters
(No.PD
)
Use these parameters when changing the I/O signals of the servo amplifier.
Special setting parameters
(No.PS
)
Use these parameters when setting specially for the linear servo motor.
Option setting parameter
(No.Po
)
These parameters are dedicated to MR-J3W.