Mitsubishi Electric MELSERVO-J3W Series, Instruction Manual

Page: 400 / 500

14. USING A DIRECT DRIVE MOTOR
14 - 67
(a) Combinations of encoder cables
1) For incremental system
CN2B
CN2A
(Note 2)
Servo amplifier
a) b)
Direct drive motor
TM-RFM
50m or less
(Note 1) Encoder cable A)
Note 1. Refer to section (3) (b) 1) of this section for details.
2. Options for B-axis are the same as for A-axis.
2) For absolute position detection system
CN2B
CN2A
(Note 3)
Servo amplifier
a) b)
Direct drive motor
TM-RFM
c) b)
Absolute position storage unit
MR-BTAS01
50m or less
(Note 1) Encoder cable A) (Note 2) Encoder cable B)
Note 1. Refer to section (3) (b) 2) of this section for details.
2. Refer to section (3) (b) 3) of this section for details.
3. Options for B-axis are the same as for A-axis.
4. For cables of 20m or longer, contact your local sales office.